BOUNDCRS[SOURCECRS[PROJCRS["GDA94 / Geoscience Australia Lambert",BASEGEOGCRS["GDA94",DATUM["Geocentric Datum of Australia 1994",ELLIPSOID["GRS 1980",6378137,298.257222101,LENGTHUNIT["metre",1]]],PRIMEM["Greenwich",0,ANGLEUNIT["degree",0.0174532925199433]],ID["EPSG",4283]],CONVERSION["Geoscience Australia Standard National Scale Lambert Projection",METHOD["Lambert Conic Conformal (2SP)",ID["EPSG",9802]],PARAMETER["Latitude of false origin",0,ANGLEUNIT["degree",0.0174532925199433],ID["EPSG",8821]],PARAMETER["Longitude of false origin",134,ANGLEUNIT["degree",0.0174532925199433],ID["EPSG",8822]],PARAMETER["Latitude of 1st standard parallel",-18,ANGLEUNIT["degree",0.0174532925199433],ID["EPSG",8823]],PARAMETER["Latitude of 2nd standard parallel",-36,ANGLEUNIT["degree",0.0174532925199433],ID["EPSG",8824]],PARAMETER["Easting at false origin",0,LENGTHUNIT["metre",1],ID["EPSG",8826]],PARAMETER["Northing at false origin",0,LENGTHUNIT["metre",1],ID["EPSG",8827]]],CS[Cartesian,2],AXIS["(E)",east,ORDER[1],LENGTHUNIT["metre",1]],AXIS["(N)",north,ORDER[2],LENGTHUNIT["metre",1]],USAGE[SCOPE["Topographic mapping, environmental studies."],AREA["Australia - Australian Capital Territory; New South Wales; Northern Territory; Queensland; South Australia; Tasmania; Western Australia; Victoria."],BBOX[-43.7,112.85,-9.86,153.69]],ID["EPSG",3112]]],TARGETCRS[GEOGCRS["GDA2020",DATUM["Geocentric Datum of Australia 2020",ELLIPSOID["GRS 1980",6378137,298.257222101,LENGTHUNIT["metre",1]]],PRIMEM["Greenwich",0,ANGLEUNIT["degree",0.0174532925199433]],CS[ellipsoidal,2],AXIS["geodetic latitude (Lat)",north,ORDER[1],ANGLEUNIT["degree",0.0174532925199433]],AXIS["geodetic longitude (Lon)",east,ORDER[2],ANGLEUNIT["degree",0.0174532925199433]],USAGE[SCOPE["Geodesy, cadastre, engineering survey, topographic mapping."],AREA["Australia including Lord Howe Island, Macquarie Island, Ashmore and Cartier Islands, Christmas Island, Cocos (Keeling) Islands, Norfolk Island. All onshore and offshore."],BBOX[-60.55,93.41,-8.47,173.34]],ID["EPSG",7844]]],ABRIDGEDTRANSFORMATION["GDA94 to GDA2020 (2)",METHOD["NTv2",ID["EPSG",9615]],PARAMETERFILE["Latitude and longitude difference file","GDA94_GDA2020_conformal_and_distortion.gsb"],USAGE[SCOPE["Transformation of GDA94 coordinates when localised distortion needs to be taken into account, e.g. if GDA94 coordinates were derived from survey control monuments."],AREA["Australia - Australian Capital Territory; New South Wales; Northern Territory; Queensland; South Australia; Tasmania; Western Australia; Victoria."],BBOX[-43.7,112.85,-9.86,153.69]],ID["EPSG",8447],REMARK["See GDA94 to GDA2020 (1) or (3) (codes 8048 and 8446) for alternative conformal-only transformation without local distortion modelling. GDA2020 Technical Manual and fact sheet T1 give guidance on which to use."]]]