EPSG:8446

GDA94 to GDA2020 (3)

Attributes

Geodetic CRS: GDA94

Datum: Geocentric Datum of Australia 1994

Ellipsoid: GRS 1980

Prime meridian: Greenwich

Data source: EPSG

Information source: GDA2020 Technical Manual and ICSM Datum Technical Fact Sheet TN1 (http://www.icsm.gov.au).

Revision date: 2019-09-17

Scope: Transformation of GDA94 coordinates that have been derived through GNSS CORS.

Remarks: Gives identical results to Helmert transformation GDA94 to GDA2020 (1) (code 8048). See GDA94 to GDA2020 (2) (code 8447) for alternative with local distortion modelling included. GDA2020 Technical Manual and fact sheet T1 give guidance on which to use.

Method: NTv2

Area of use: Australia - Australian Capital Territory; New South Wales; Northern Territory; Queensland; South Australia; Tasmania; Western Australia; Victoria.

Description: (0,)

MapTiler banner

Definition: OGC Well Known Text 2 (2019)

COORDINATEOPERATION["GDA94 to GDA2020 (3)",
    VERSION["ICSM-Aus NTv2 Conf"],
    SOURCECRS[
        GEOGCRS["GDA94",
            DATUM["Geocentric Datum of Australia 1994",
                ELLIPSOID["GRS 1980",6378137,298.257222101,
                    LENGTHUNIT["metre",1]]],
            PRIMEM["Greenwich",0,
                ANGLEUNIT["degree",0.0174532925199433]],
            CS[ellipsoidal,2],
                AXIS["geodetic latitude (Lat)",north,
                    ORDER[1],
                    ANGLEUNIT["degree",0.0174532925199433]],
                AXIS["geodetic longitude (Lon)",east,
                    ORDER[2],
                    ANGLEUNIT["degree",0.0174532925199433]],
            ID["EPSG",4283]]],
    TARGETCRS[
        GEOGCRS["GDA2020",
            DATUM["Geocentric Datum of Australia 2020",
                ELLIPSOID["GRS 1980",6378137,298.257222101,
                    LENGTHUNIT["metre",1]]],
            PRIMEM["Greenwich",0,
                ANGLEUNIT["degree",0.0174532925199433]],
            CS[ellipsoidal,2],
                AXIS["geodetic latitude (Lat)",north,
                    ORDER[1],
                    ANGLEUNIT["degree",0.0174532925199433]],
                AXIS["geodetic longitude (Lon)",east,
                    ORDER[2],
                    ANGLEUNIT["degree",0.0174532925199433]],
            ID["EPSG",7844]]],
    METHOD["NTv2",
        ID["EPSG",9615]],
    PARAMETERFILE["Latitude and longitude difference file","GDA94_GDA2020_conformal.gsb"],
    OPERATIONACCURACY[0.05],
    USAGE[
        SCOPE["Transformation of GDA94 coordinates that have been derived through GNSS CORS."],
        AREA["Australia - Australian Capital Territory; New South Wales; Northern Territory; Queensland; South Australia; Tasmania; Western Australia; Victoria."],
        BBOX[-43.7,112.85,-9.86,153.69]],
    ID["EPSG",8446],
    REMARK["Gives identical results to Helmert transformation GDA94 to GDA2020 (1) (code 8048). See GDA94 to GDA2020 (2) (code 8447) for alternative with local distortion modelling included. GDA2020 Technical Manual and fact sheet T1 give guidance on which to use."]]

Definition: PROJ.4

+proj=pipeline +step +proj=axisswap +order=2,1 +step +proj=unitconvert +xy_in=deg +xy_out=rad +step +proj=hgridshift +grids=au_icsm_GDA94_GDA2020_conformal.tif +step +proj=unitconvert +xy_in=rad +xy_out=deg +step +proj=axisswap +order=2,1

Definition: JavaScript (Proj4js)

proj4.defs("EPSG:8446","+proj=pipeline +step +proj=axisswap +order=2,1 +step +proj=unitconvert +xy_in=deg +xy_out=rad +step +proj=hgridshift +grids=au_icsm_GDA94_GDA2020_conformal.tif +step +proj=unitconvert +xy_in=rad +xy_out=deg +step +proj=axisswap +order=2,1");

Definition: JSON

{
    "$schema": "https://proj.org/schemas/v0.7/projjson.schema.json",
    "type": "Transformation",
    "name": "GDA94 to GDA2020 (3)",
    "source_crs": {
        "type": "GeographicCRS",
        "name": "GDA94",
        "datum": {
            "type": "GeodeticReferenceFrame",
            "name": "Geocentric Datum of Australia 1994",
            "ellipsoid": {
                "name": "GRS 1980",
                "semi_major_axis": 6378137,
                "inverse_flattening": 298.257222101
            }
        },
        "coordinate_system": {
            "subtype": "ellipsoidal",
            "axis": [
                {
                    "name": "Geodetic latitude",
                    "abbreviation": "Lat",
                    "direction": "north",
                    "unit": "degree"
                },
                {
                    "name": "Geodetic longitude",
                    "abbreviation": "Lon",
                    "direction": "east",
                    "unit": "degree"
                }
            ]
        },
        "id": {
            "authority": "EPSG",
            "code": 4283
        }
    },
    "target_crs": {
        "type": "GeographicCRS",
        "name": "GDA2020",
        "datum": {
            "type": "GeodeticReferenceFrame",
            "name": "Geocentric Datum of Australia 2020",
            "ellipsoid": {
                "name": "GRS 1980",
                "semi_major_axis": 6378137,
                "inverse_flattening": 298.257222101
            }
        },
        "coordinate_system": {
            "subtype": "ellipsoidal",
            "axis": [
                {
                    "name": "Geodetic latitude",
                    "abbreviation": "Lat",
                    "direction": "north",
                    "unit": "degree"
                },
                {
                    "name": "Geodetic longitude",
                    "abbreviation": "Lon",
                    "direction": "east",
                    "unit": "degree"
                }
            ]
        },
        "id": {
            "authority": "EPSG",
            "code": 7844
        }
    },
    "method": {
        "name": "NTv2",
        "id": {
            "authority": "EPSG",
            "code": 9615
        }
    },
    "parameters": [
        {
            "name": "Latitude and longitude difference file",
            "value": "GDA94_GDA2020_conformal.gsb",
            "id": {
                "authority": "EPSG",
                "code": 8656
            }
        }
    ],
    "accuracy": "0.05",
    "scope": "Transformation of GDA94 coordinates that have been derived through GNSS CORS.",
    "area": "Australia - Australian Capital Territory; New South Wales; Northern Territory; Queensland; South Australia; Tasmania; Western Australia; Victoria.",
    "bbox": {
        "south_latitude": -43.7,
        "west_longitude": 112.85,
        "north_latitude": -9.86,
        "east_longitude": 153.69
    },
    "id": {
        "authority": "EPSG",
        "code": 8446
    },
    "remarks": "Gives identical results to Helmert transformation GDA94 to GDA2020 (1) (code 8048). See GDA94 to GDA2020 (2) (code 8447) for alternative with local distortion modelling included. GDA2020 Technical Manual and fact sheet T1 give guidance on which to use."
}

Definition: MapServer - MAPfile

PROJECTION
	"proj=pipeline"
	"step"
	"proj=axisswap"
	"order=2,1"
	"step"
	"proj=unitconvert"
	"xy_in=deg"
	"xy_out=rad"
	"step"
	"proj=hgridshift"
	"grids=au_icsm_GDA94_GDA2020_conformal.tif"
	"step"
	"proj=unitconvert"
	"xy_in=rad"
	"xy_out=deg"
	"step"
	"proj=axisswap"
	"order=2,1"
END

Definition: Mapnik

<?xml version="1.0" encoding="utf-8"?>
<Map srs="+proj=pipeline +step +proj=axisswap +order=2,1 +step +proj=unitconvert +xy_in=deg +xy_out=rad +step +proj=hgridshift +grids=au_icsm_GDA94_GDA2020_conformal.tif +step +proj=unitconvert +xy_in=rad +xy_out=deg +step +proj=axisswap +order=2,1">
	<Layer srs="+proj=pipeline +step +proj=axisswap +order=2,1 +step +proj=unitconvert +xy_in=deg +xy_out=rad +step +proj=hgridshift +grids=au_icsm_GDA94_GDA2020_conformal.tif +step +proj=unitconvert +xy_in=rad +xy_out=deg +step +proj=axisswap +order=2,1">
	</Layer>
</Map>

Definition: SQL (PostGIS)

INSERT into spatial_ref_sys (srid, auth_name, auth_srid, proj4text, srtext) values ( 8446, 'EPSG', 8446, '+proj=pipeline +step +proj=axisswap +order=2,1 +step +proj=unitconvert +xy_in=deg +xy_out=rad +step +proj=hgridshift +grids=au_icsm_GDA94_GDA2020_conformal.tif +step +proj=unitconvert +xy_in=rad +xy_out=deg +step +proj=axisswap +order=2,1', 'None');